dodge journey 2014 battery jump

How to Jump Start a Dodge Journey: A Complete Guide to Reviving Your Car

There may come a time when your Dodge Journey experiences a dead battery and you need to jump start it. Knowing how to jump start your vehicle can save you time and money, and get you back on the road quickly. In this guide, we’ll walk you through the step-by-step process of jump-starting a Dodge Journey.

What You’ll Need:

• A set of jumper cables
• Another vehicle with a functioning battery
• Safety gloves and goggles (optional but recommended)

Step 1: Find a Good Samaritan

If your Dodge Journey’s battery has died, you’ll need another vehicle with a functioning battery to jump-start it. Ask a friend, family member, or a kind stranger nearby who is willing to help you out.

Step 2: Position the Vehicles

Park the vehicle with the functioning battery close to your Dodge Journey, allowing enough space between the hood of both vehicles to easily access the batteries. Both vehicles should be turned off, with their parking brakes engaged.

Step 3: Identify the Battery Terminals

Open the hood of both vehicles and locate the battery terminals. They should be labeled as positive (+) and negative (-). The positive terminal is usually red, while the negative terminal is often black.

Step 4: Connect the Jumper Cables

Now it’s time to connect the jumper cables:

Step 5: Start the Vehicles

Once the jumper cables are securely connected, start the vehicle with the functioning battery and let it run for a few minutes. This will allow the dead battery to gain some charge.

Step 6: Start the Dead Vehicle

Now, try starting your Dodge Journey. If the battery was the underlying issue, it should start up. If it doesn’t, double-check the connections and let the vehicles sit for a few more minutes before attempting again.

Step 7: Disconnect the Jumper Cables

Once your Dodge Journey is running, carefully disconnect the jumper cables in the reverse order of how they were connected:

• Disconnect the negative (-) cable from the engine block of your Dodge Journey.
• Disconnect the negative (-) cable from the good battery.
• Disconnect the positive (+) cable from the good battery.
• Disconnect the positive (+) cable from the dead battery (Dodge Journey).

Final Thoughts

Jump-starting a Dodge Journey is a simple process as long as you follow the proper steps and take necessary precautions. Remember to always wear safety gloves and goggles when working with batteries. If your Dodge Journey continues to experience battery issues, it’s recommended to have the battery and charging system checked by a qualified mechanic.

Hopefully, this guide has helped you become more confident in jump-starting your Dodge Journey in case of a dead battery. Stay safe on the road!

Frequently Asked Questions On How To Jump Start A Dodge Journey: A Complete Guide To Reviving Your Car

How do you jump start a dodge journey.

To jump start a Dodge Journey, you’ll need a set of jumper cables and another vehicle with a fully charged battery. Connect the positive terminals, negative terminals, then start the Dodge Journey’s engine.

Can I Use A Portable Jump Starter To Jump Start My Dodge Journey?

Yes, a portable jump starter is a great alternative to using another vehicle. Connect the jump starter to the Dodge Journey’s battery, then start the engine.

What Should I Do If My Dodge Journey Doesn’t Start After A Jump?

If your Dodge Journey doesn’t start after a jump, double-check the connections, let the battery charge for a few minutes, and try again. If it still doesn’t start, you may need to replace the battery.

How Often Should I Jump Start My Dodge Journey?

Ideally, you should only jump start your Dodge Journey when the battery is dead. However, if you frequently jump start it, it may be time to have the battery and electrical system checked by a professional.

Related posts:

• How to Reset Nissan Rogue Radio: Easy Guide for Reviving Your Sound System
• Can a Subaru Jump Start Another Car: The Complete Guide
• How to Easily Reset Dodge Journey Oil Change Light: Complete Guide
• How to Easily Program Key Fob for Push Start Dodge Journey: Step-by-Step Guide

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

How to Jump a Dodge Journey

If your Dodge Journey’s battery is out of juice, a jump start may be the only way to get it up and running. However, if you’ve got no experience of jump-starting a car battery, you may not know how to start. This process isn’t too tricky, but needs to be carried out with care and precision to avoid any mistakes or risks. This guide will cover exactly how to jump a Dodge Journey, step by step. We’ll also cover what to do when your Journey is up and running again.

How to Jump Start a Journey: Step 1 – Preparation

First, before popping the hood or hooking up the cables, there are a few preparatory steps to follow. Prep really matters when it comes to jump-starting a Dodge Journey (or any other car) as it reduces the risk of any accidents or unwanted side effects from the process.

First, you’ll need to make sure you’ve got a good quality set of jumper cables to use. You’ll also need a secondary vehicle (a “donor” vehicle) with a fully-functional battery. Alternatively, you can use a portable battery booster to jump your Journey if another vehicle isn’t available. Safety gloves and glasses are also recommended.

Make sure the parking brake is engaged and shift your car into “Park,” with the ignition on “Lock.” Additionally, switch off all electrical systems, like the heater, the radio, and any in-car entertainment screens or GPS devices.

You’ll also want to make sure that, if you’re using a secondary vehicle to jump your Journey, it’s parked close by. Ideally, the two vehicles should be parked facing one another, so you can easily pop the hoods on both and connect the cables without running out of room.

Step 2. Pop the Hood

Find the hood release lever, which is typically below and to the left of the steering wheel, and pull it. Then step out of the vehicle, release the safety catch, and lift the hood. Use the hood prop to hold the hood in place while you work. Do the same for the secondary vehicle.

Step 3. Locate the Terminals

Next, you’ll want to locate the car battery and the positive (+) and negative (-) terminals, where you’ll be connecting the jumper cables. Make sure to put on your safety glasses and gloves before this stage, if you have them.

The positive terminal is red and marked by a + sign. Find it and remove its cover. If you have any trouble with this, look for the little locking tab. Push on that, then pull the cover upward, and it should come away freely.

You’ll also need a negative ground. For this, you can use any unpainted metal surface around the engine. Find a spot that is easy to access and keep it in mind when attaching the negative cables in the next step.

This is also a good time to inspect the batteries in both vehicles. Look for any signs of damage, such as cracks, acid leaks, corrosion, or even swelling of the battery itself. If the battery looks damaged or is leaking, it’s best to avoid attempting a jump start and call a mechanic instead.

Step 4. Connect the Cables

This is the most important step, and arguably the trickiest, too. You’ll need to hook up the jumper cables to the two car batteries, and there’s a very precise order to follow. If you do anything out of order or connect to the wrong locations, you could endanger yourself or damage the vehicles.

To begin, take the red (positive) jumper cable and connect one of the clamps to the positive terminal on the Dodge Journey. After that, connect the other end to the positive terminal on your secondary vehicle.

Take the black (negative) cable and connect one clamp to the negative terminal on the secondary vehicle, or your portable booster. Continue by attaching the other end to your negative ground (an unpainted metal section) on the Journey.

Step 5. Turn On the Secondary Vehicle

Turn on the engine of the secondary vehicle. Let it run for a few minutes to transfer energy from the donor battery to the dead Dodge Journey battery. You can also rev the engine in the secondary vehicle to help speed up the process.

After a few minutes, try starting the Dodge Journey. If it starts, disconnect the cables in the following order:

• The negative ground from the Dodge Journey.
• The negative cable from the donor vehicle.
• The positive clamp on the donor vehicle.
• The positive clamp from the Dodge Journey.

If the Dodge Journey still won’t turn over, leave it for another few minutes and try again. It may just need some more time. If it still won’t start, even after several attempts, there may be an underlying issue with either the battery or the alternator, and you might have to call a mechanic to fix it.

Step 6. Drive the Dodge Journey

Once your Dodge Journey fires up, it’s important to drive it around for a little while. This helps to recharge the battery. Aim to drive for at least 10 minutes, if not longer. The longer you can keep your car running, the more the battery will charge. Also, try to avoid using any electrical systems during this time, like the radio, as this will put extra stress on the battery and use power unnecessarily.

You may now want to visit a dealership or local garage to get your Dodge Journey looked at. Expert technicians can diagnose unexplained battery issues. However, you might already be able to figure out what went wrong on your own. For example, if you left the headlights on for a while, that’s most likely why the battery drained and needed to be jumped.

Why do you need a jump-start?

There are multiple potential reasons why a car might need a jump-start, including a dying battery, issues with the charging system, or a faulty alternator. In many cases, it’s because the car hasn’t been driven in a long time, causing the battery to gradually lose charge.

Jump Your Journey in a Few Easy Steps

As you can see, jumping a Dodge Journey is pretty similar to jumping any other car. It’s a relatively simple process, once you know how, but it still requires caution. Make sure to wear the proper safety equipment, take your time, and follow the correct clamping order to avoid any problems along the way.

Related posts:

No related posts.

Leave a Comment Cancel reply

Home » Troubleshooting » Dodge Journey won’t start – causes and how to fix it

Dodge Journey won’t start – causes and how to fix it

Dodge Journey is a reliable road companion, but its a machine with hundreds of interconnected parts, and like any other machine it sometimes fail to deliver normal operation. In this article we go through most common causes of Journey breakdown and how you can fix the problem.

The most common causes that hinders normal starting operation of your Journey are dead 12v battery, corrosion on battery terminals, and dead key fob battery. However, bad alternator, clogged fuel filter, broken starter, blown fuse, empty gas tank, immobilizer error, or any fault in the electrical system can also cause your vehicle not to start.

1. Weak Battery

If your Journey’s engine won’t crank or cranks very slowly, then the most likely culprit is weak or dead 12v battery. Investigating more closely and doing a battery voltage test will clarify whether the starting problem is due to the battery. A test can be done to measure the voltage between the battery poles, check the acid level and assess the condition of the starter battery.

If a new car battery has been installed, the battery may not have yet reached its full capacity. There is nothing to worry about. A new battery only develops its full capacity over time.

Test 12v battery

The voltage of the battery on your Dodge Journey can be measured precisely with a multimeter. Before the test, the multimeter is set to the voltage range of the battery and connected to its plus and minus poles. Successful testing of the car battery, i.e. checking the voltage, usually results in values ​​of approx. 12 to 13 volts. Values ​​above 14 or below 11.5 volts require an expert assessment of the condition of the car battery. Because the battery may have a defect with these measured values ​​and must be replaced.

Jump start Dodge Journey

If dead battery is the reason for the breakdown of your Journey, you can easily jump start it using jumper cables and a healthy battery from another vehicle, or using a battery booster if available.

First connect red cable to the positive terminal of your Journey’s dead battery, then to the positive terminal of donor battery. Next connect black cable to the negative terminal of donor battery, then to the bare metal in the engine bay of your Journey. Start the donor vehicle and then your Journey. Remove the cables in reverse order.

2. Corrosion on battery

Corrosion on the contacts of your car battery leads to loss of contact and reduced current flow, which means that your engine can no longer start properly.

To know if your Journey’s starting problems are from dirty battery contacts, you need to investigate them. If you lift the rubber covers over the two battery terminals, you can check the terminals for corrosion. If you discover white deposits or silvery-green deposits, but no further cracks or damage, you do not have to replace the battery, just clean it.

Clean battery corrosion

To clean the battery on your Dodge Journey, you have to remove the pole cables first, which requires no special knowledge, just a little concentration, as the order is very important. First remove the black cable from the negative pole. If the pole clamp is very tight, you can open it with pliers. We advise against using metal pliers, but if you use them, you must make sure that you do not touch any other parts of the body. Next you can unplug the red positive pole cable. Once the battery has been removed from the circuit, you can start cleaning the corroded battery. After cleaning, reconnect the terminals.

3. Weak key fob battery

If your Journey has push start/stop button, then its possible that your vehicle may not start due to weak key fob battery. Don’t worry, you can still start your vehicle – the battery is only used to send the signal for locking/unlocking. If the key fob battery is empty, the door no longer locks or unlocks at the push of a button. The doors must then be opened manually. The immobilizer is controlled by a passive transponder. Passive means, among other things, that the transponder in the key does not need its own power source.

How to start Dodge Journey with dead key fob battery

If you have a model of Journey which only has a key fob with start/stop button and no place to insert a key, then try placing your key fob as close to the start/stop button as you can and then start the vehicle.

Tip: You can try starting your Journey with its second key. It will also rule out any other problem with the first key, for example, water damage.

4. Broken starter motor

A starter is a motor for starting the engine of your Journey. The average life of a starter motor is about 100,000 to 150,000 miles, and the life will be shortened if the engine is started more frequently. In any case, since the starter motor also has a limited life, it will break down after using the car for a long time, and if the starter motor breaks down, the engine will not start.

Symptom: When you turn the key to start the engine of your Journey, you will hear a clicking sound, which is the sound of a bad starter motor. And if the starter motor does not work with a healthy battery, suspect a malfunction of the starter.

If the starter fails, it usually needs to be replaced with a new one.

Temporary fix for starter

If the engine does not start due to the starter, the engine may start if you turn the key while hitting the starter motor with something like a stick or metal tool. This workaround is effective when the parts inside the starter are stuck together or the gears are slightly out of alignment.

However, it is possible that the starter is nearing the end of its life, so it is recommended that you have it inspected at a dealer or maintenance shop.

5. Defective alternator

An alternator is a generator that produces electricity. If your Journey’s alternator fails, it will not be able to produce electricity and the battery will not be able to charge. Therefore, even if you think that the cause of the engine not starting is a battery failure and replace the battery, the battery will soon run out and the engine will not start.

Alternators rarely break down. In particular, modern cars have improved performance, so it is said that they will last 200,000 to 300,000 miles. Still, it can break down depending on how you use it, and in the case of a used car, the alternator may be quite old. Don’t let your guard down.

If the alternator breaks down, it must be replaced with a new alternator.

6. Clogged fuel filter

The fuel filter of your Journey does not wear out like a mechanical part, but it gets clogged by dirt and airborne particles and clogs over time. The permeability of the filter drops, and so does the fuel pressure. To a certain extent this doesn’t matter, but if the fuel filter is too dirty, the engine will no longer perform at full capacity and in some instance may not start at all. Cleaning is not possible, you can only change the filter.

7. Fuel pump failure

If your Journey’s fuel pump fails, then the engine won’t start. The pump normally ensures that the necessary amount of fuel is passed from the tank to the injection system of the engine with sufficient pressure.

Before your fuel pump stops working, it usually becomes noticeable: if your car’s engine breaks down from time to time, the car is difficult to start, the engine jerks a little or the engine performance drops, you should have your pump checked.

Wear or contamination of the pump can be the reason for this. If the pump is leaking, a power contact is broken, a line or a pump lever is broken, the fuel pump is usually also noticeable before failure. You can have a defective fuel pump replaced in your workshop.

8. Blown fuse

In rare cases, a blown fuse could also be the culprit in the breakdown of your Journey. Check all fuses in the fuse box essential for starting the engine. But, be careful when lending a hand yourself to the fuse box! The box is under power and repairs or tests should always be done in a workshop.

9. Defective spark plugs

Without functioning spark plugs, the engine will not start. The spark plugs themselves are often not affected by a defect. Instead, plug connections on the ignition system come loose. If only one plug is actually loose, you can fix the problem yourself on site. If a spark plug has failed, it must be replaced in the workshop.

10. Rodent damage

Rodent damage can be another reason why your Dodge Journey won’t start. The animals crawl under the vehicle and bite through cables and wires. In principle, this can affect all vehicle systems such as the fuel supply, the oil supply or the power supply.

The rodent damage can usually be seen quickly by looking into the engine compartment. The damage caused by the rodent bite can be repaired in the workshop. Be prepared for relatively high costs here.

11. Engine failure

Although very rare, but it can also be the cause of the breakdown of your Journey. If a vehicle has an engine failure, then nothing works anymore. It is not uncommon for the driver of a vehicle to be responsible for such damage. Typical causes include tearing of the timing belt, incorrect fueling, insufficient oil, hydrolock, overheating of the engine, or continuous driving in an excessive speed range.

Only an experienced mechanic can diagnose engine failure in a workshop.

Use OBD2 scanner for diagnosis

Since Dodge Journey is equipped with on-board diagnostics (OBD), a fault diagnosis can provide initial indications of where the malfunction is located.

To begin troubleshooting, you must first connect the diagnostic tool to your Journey. The OBDII connector is usually located under the dashboard. With the wire connected, you should turn the ignition on. But be careful not to start the engine. Most diagnostic devices then ask for some information about the vehicle. It is important that you enter this 100% correctly, otherwise the result of the search may be falsified. In addition to the vehicle manufacturer and model, you usually also have to type in the engine and vehicle ID number. For exact troubleshooting, always check whether the information is correct.

There are many reasons why your Journey may not start. When looking for the trigger, you should always start with the most obvious cause, the empty battery.

In any case, it is advisable for laypersons to call a breakdown service or a workshop. In the event of a defect, the latter can directly initiate the repair.

4 thoughts on “ Dodge Journey won’t start – causes and how to fix it ”

My Dodge Journey will not start after driving a short time, and then stopping about 20 minutes, then try to start, press lock unlock wait 10 minutes, car will then start every time.

This is a problem I am having with my Dodge Journey as well. I haven’t had this SUV 3 years and I am still paying on it.

My 2017 Dodge Journey ran fine in the morning yesterday, was totally dead last night – no locks, no dash lights, no power button. Long story short – disconnected + positive cable under hood to reset computer. Put cables back on after 10 min wait – got feeble spark while attaching wires. Entered car, found 4-way flashers indicating on dash. Button was accidentally depressed after morning drive. Charged battery for 1 hour with battery charger. Started fine, but needed to be driven extensively to fully charge 69-month old battery. Buying new battery tomorrow.

My dodge journey 2014 is not starting. It was stripped for overheating but now after the reassemble it’s not starting, VIN initialising and press clutch to start engine are showing on the clock

• Lexus ES makes clicking noise and won’t start – causes and how to fix it
• Cadillac SRX shakes at highway speeds – causes and how to fix it
• Renault Scenic makes grinding noise when starting – common causes
• How to remote start Hyundai Elantra with key fob or mobile device
• Audi A6 key fob not working – causes and how to fix it
• Infiniti QX50 steering wheel controls not working – causes and how to fix it
• Is Chevy HHR key fob waterproof?
• VW Jetta windshield washer not working – causes and how to fix it
• Ram ProMaster door makes a squeaking noise when opening or closing
• Range Rover Velar low AC refrigerant symptoms, how to recharge
• Dodge Charger airbag light is on – causes and how to reset
• Jaguar XJ airbag light is on – causes and how to reset
• Fiat 124 Spider shakes at highway speeds – causes and how to fix it
• Nissan Maxima makes humming noise at high speeds – causes and how to fix it
• Volvo S60 steering wheel controls not working – causes and how to fix it
• Chevy Blazer heater not working – causes and diagnosis
• How to operate climate control on BMW 3-Series
• Maserati Quattroporte burning smell causes and how to fix it
• VW Jetta dirty cabin air filter symptoms, when to replace
• Buick Encore ABS light is on – causes and how to reset

Dodge Journey: JUMP-STARTING

If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully.

NOTE: When using a portable battery booster pack follow the manufacturer’s operating instructions and precautions.

The battery in your vehicle is located between the left front headlight assembly and the left front wheel splash shield. To allow jump-starting there are remote battery posts located on the left side of the engine compartment.

2 — Remote Negative (-) Post.

3. Remove the protective cover over the remote positive (+) battery post. To remove the cover, press the locking tab and pull upward on the cover.

4. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF.

4. Connect the opposite end of the negative (-) jumper cable to the remote negative (-) post of the vehicle with the discharged battery.

If frequent jump-starting is required to start your vehicle you should have the battery and charging system inspected at your authorized dealer.

JACKING AND TIRE CHANGING

Freeing a stuck vehicle.

Flow check To determine whether coolant is flowing through the cooling system, use one of the following procedures: PREFERRED METHOD WARNING: Do not remove the cooling system pressure cap or any hose ...

Removal, Installation REMOVAL WARNING: Disable the airbag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Disconnect and isolate the negat ...

Removal 1. Raise and support vehicle. NOTE: Perform 2 through 5 on each side of vehicle to complete pad set removal. Fig. 124: TIRE AND WHEEL MOUNTING 2. Remove wheel mounting nuts (3), then tire ...

Dodge Journey Owners Manual

• Things to know before starting your vehicle
• Understanding the features of your vehicle
• Understanding your instrument panel
• Starting and operating
• What to do in emergencies
• Maintaining your vehicle
• Maintenance schedules
• If you need consumer assistance

Dodge Journey Service Manual

• Accessories and Equipment
• Differential and Driveline
• Heating & Air Conditioning
• Front Suspension
• Transmission

• Remember me Not recommended on shared computers

Forgot your password?

• Electrical, Battery & Charging

2014 2.4 Won’t start randomly

By markfs33 January 12, 2023 in Electrical, Battery & Charging

• Reply to this topic
• Start new topic

Recommended Posts

Hi. I have a 2014 2.4L Journey that won’t start randomly.

I have running with an issue with the fuel level sensor, it’s broken and I have the code for that  issue on the scanner but it was working just fine despite marking empty fuel all the time.

However a couple of days ago I went to work and back home normally, but in the evening it did not start, next day did not start at all, yesterday it start normally like 10 times that I try. Today I came to work but now it doesn’t start anymore again, there’s a click sound but other than that nothing.  

My battery voltage is 12.7, and my fuses are ok. We tried jump starting but it didn’t work either.

When the car starts it work just flawless, no sounds or jumps or anything. Can it be related to the fuel level sensor?. The scanner shows no other code apart from the fuel sensor being high.

Link to comment

Share on other sites.

John/Horace

Welcome to the site. How many miles/kilometres on vehicle. Click with no start and proper battery volatage (12.7) would usually be a starter issue. Jump starting with cables shows it’s probably not your battery.

Could try to confirm with a multi meter. When key is turned all the way to engage starter, the small wire at the starter should have battery voltage signal that is sent by the key switch.  Could even confirm that with 12 volt test light.  The click sound probably means the starter is getting this signal and solenoid on starter is worn.  If light tap on starter with mallet makes it work a few more times,  another sign it’s bad contacts inside solenoid on starter.  So new or rebuilt starter assembly needed.

Thanks for the welcome and the reply.

My Journey is close to 85k kilometers.  We think that is not baterry because all the electric things works just fine, head lights, radio, horn, dash cam and we also try to jump start it with cables and didn’t work. Also checking with both scanner and multimeter shows on stand by around 12.7 and with engine running (when it starts ?) around 12.3-12.4.

The test on the key I cannot do it because the start is with button and the wireless key fob, so I press the brake and the button and starts. In this case I press it and just hear a click (when the door is open, otherwise its not that loud to hear it from inside the cockpit) and the engine don’t turn on, and the check engine light flashes a couple times on the dashboard. It’s like when I press the run button but without pressing the brakes plus the check engine flashing.

I scanned it when it did this but my scanner only shows, as I mentioned before the Fuel Level sensor issue.

I tried to start it again a few minutes ago, first with no luck, but after a couple of tries it started just fine, so I am confused.

There are a few safety switches that need to work for car to turn over and engine to actually run.

Next no start (turn over) try putting car in neutral and see if it starts. Transmission range selector switch when in park or neutral provides a ground for the starter relay to engage.

A bad starter solenoid can be intermittent. Sometimes working and other times not. Worn internal  contacts  and springs.  The starter relay under hood can be manually jumpered with a piece of wire across the two contacts 85 and 87 on the fuse box base when relay plugs in. If it still clicks then it is clearly a starter issue. This test bypasses all safety switchs and the push button start. 

• 2late4u and markfs33

I am confident the fuel level switch and code are not preventing the engine from turning over.

A 12 volt test light on the starter motor small wire plug, would show if push button is always sending a signal when pushed.

19 hours ago, markfs33 said: Hi. I have a 2014 2.4L Journey that won’t start randomly.   I have running with an issue with the fuel level sensor, it’s broken and I have the code for that  issue on the scanner but it was working just fine despite marking empty fuel all the time. However a couple of days ago I went to work and back home normally, but in the evening it did not start, next day did not start at all, yesterday it start normally like 10 times that I try. Today I came to work but now it doesn’t start anymore again, there’s a click sound but other than that nothing.   My battery voltage is 12.7, and my fuses are ok. We tried jump starting but it didn’t work either. When the car starts it work just flawless, no sounds or jumps or anything. Can it be related to the fuel level sensor?. The scanner shows no other code apart from the fuel sensor being high.   Any ideas?

Please report back on whatever you find to be your problem for others that might have this problem

Thank you! I will try this and report back

wpginterceptor

Deadf spot in your starter..  had this issue on my 78 Chevy Nova!!  was a dead spot in the starter..  new starter fixed that

If the battery is over 3 yrs old get it tested ,,,,, have it load tested to see if it is in good shape....no matter what you think if it is good or not get it tested as that is the easiest to check and cheapest usually free at most part stores,,,also it will involve some time and labor but if it checks out good then remove the cables and clean and tighten them before doing anything else.... 95 % of non start problems are from weak batteries that will run the radio show the lights work and the horn can work but not start the car..also checking all grounds on the frame and starter for corroded or semi loose connections will create on and off starting problems..LIKe i said simple and free things to do before going after expensive fixes by guessing

• 3 months later...

good evening, I as will is having same issues like markfs33 is having on the exact same 2014 dodge journey 2.4L  86,000miles on it.   took mine to AutoZone to get battery check out at first an they told me it had a bad battery so I purchased a new one, but it still does the same randomly start no crank issue but all interior lights on.     I've check my relay fuses n placed my fingers to hear n feel the clicks on them but it just won't engage like when we first bought it.  after a couple of tries it starts. 

CPS crank sensor can do random no start , sometimes without storing a code. 

would it be possible to test starter  an how ?

what bout the push start button?

or the cps ? 

Starting point is always codes. Starter can be bench tested and tec can also  jumper starter relay base connections to by pass all security stuff like transmission range selector, key security and even push button.  If lightly tapping starter with rubber mallet makes it work, contacts/springs in solenoid bad, new or rebuilt starter needed.

Find a shop that diagnoses and doesn’t just guess at things.

CPS very tricky to test, maybe with an oscilloscope. Electronic lab equip that mechanics don’t have. Scanner often will show a CPS code, but not always. $30 part for oem.   It,s can becconsidered a wear item after 100k or so, on some cars.  Heat and vibration eventually affects part.

A loose starter can be tested on the ground with a battery and jumper cables and a screw driver.

Power connections arced out with screw driver to engage solenoid and motor.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account. Note: Your post will require moderator approval before it will be visible.

×   Pasted as rich text.    Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.    Display as a link instead

×   Your previous content has been restored.    Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

• Insert image from URL
• Submit Reply
• Existing user? Sign In

More Forum Apps

• Online Users
• Leaderboard

|| Forum Activity ||

• All Activity
• Create New...

Battery Saver Mode Dodge Journey [Meaning & Reset]

This article will provide an explanation of the meaning behind “Battery Saver Mode” coming up on your Dodge Journey, including its main causes and solutions for resetting the alert.

Without further delay, let’s dive in!

What Does “Battery Saver Mode” Mean on a Dodge Journey?

Table of Contents

The battery on your Dodge Journey plays a critical role in the operation of your vehicle.

It provides power to run all of the systems in your Dodge Journey, including the air conditioning, radio, and navigation system.

And when you start your engine, it also powers up the starter motor so it can turn over.

If the battery voltage drops below a certain level, the computer will automatically shut down some of these systems to save the battery.

This is known as “Battery Saver Mode” and is designed to protect your battery from draining completely, causing your car to stall.

Here are some things you might experience when the Battery Saver Mode alert appears:

• Your Dodge Journey may fail to start.
• Interior and exterior lights may become dimmer.
• The infotainment screen may stop working.
• The car may stall.
• Windows may malfunction.
• Battery Saver Mode Alert

What Causes the Dodge Journey “Battery Saver Mode” Alert?

Now that I have briefly explained what “battery saver mode” is,

Let’s now look at the main possible causes of this fault message.

1. Worn Out Battery:

The number one cause of the “battery saver mode” message on your Dodge Journey is a bad battery.

The most likely cause is that your battery is old and has reached the end of its life.

Over time the battery losses power, and its ability to hold a charge diminishes.

When this happens, the alternator can’t charge your battery properly,

And your Dodge Journey may enter “battery saver mode” in an effort to prevent the battery from over-discharging while you driving.

From my experience as a mechanic, a Dodge Journey battery should last at least 3-5 years before needing to be replaced.

If your car battery is older than this, then it may be time to replace it.

The quickest way to tell if your battery is bad is to jump-start your vehicle.

If this solves the problem, then you can be confident that the battery is bad and needs to be replaced.

2. Faulty Alternator:

The second most likely cause of the battery saver active problem is a damaged alternator.

The alternator is responsible for generating electricity that is used to charge your car battery.

If the alternator fails, it will be unable to generate enough power to keep up with the demands of starting your vehicle or performing other electrical functions.

This can cause your Dodge Journey to enter “battery saver mode” since the battery is not getting charged.

In fact, the opposite effect is happening.

One trick to check if the problem is caused by a bad alternator is to start the vehicle,

Then leave it running for a few minutes (3-5 minutes).

After that, disconnect the negative battery terminal.

If your Journey switches off as soon as you disconnect the negative battery terminal, then it’s a sign the alternator is bad.

If the car continues to run although you disconnected one of the terminals, then the problem is not with your alternator.

3. Loose Battery Terminals:

Another reason why your Dodge Journey is displaying “Battery saver mode” on the dashboard is that the battery terminals are loose.

When battery terminals are loose, it makes it difficult for power to flow from the alternator to the battery.

This makes it hard for your vehicle battery to charge and run at full capacity.

If you have a loose battery terminal, it can cause your Dodge Journey to enter Battery saver mode.

4. Worn Serpentine Belt:

The Serpentine belt (Also known as the Alternator belt) is a rubber-like belt in your Dodge that connects the pulley on your alternator and other components like the power steering pump and air-con.

If this belt breaks due to wear and tear, the pulleys won’t turn, which causes the alternator not to work.

As a result of this, a “Battery saver mode” warning message will come on.

How to Fix and Reset Dodge Journey’s “Battery Saver Mode” Message

Lastly, let’s look at how to go about combating this warning message.

Check the Battery Terminals

The first thing I recommend that you do is check the battery terminals and make sure that they’re tight.

If they’re loose, tighten them as much as you can with a screwdriver.

Whilst you are still there, you also want to check if there is no visible sign of corrosion on both terminals and the battery itself.

If there is corrosion, clean this off using a wire brush and hot water.

Then reconnect the battery terminals, if the message is still there, move on to step two.

2. Replace the Battery

If you have checked the battery terminals and there is no sign of corrosion, then you need to replace your car’s battery.

But before changing the battery, make sure that you have it tested (You can do this at your dealer or auto stores like Autozone).

The reason for this is that if you have a dead battery, it could be caused by something else, like not driving long enough.

You don’t want to replace the battery only to find out that it didn’t fix the problem (Unless your Dodge Journey battery is more than three years old)

So once you have changed your car battery, restart your car and see if the message still appears on your dashboard.

In most cases, replacing the battery will fix the problem.

3. Have the Alternator Tested/Replaced

If the battery is still in good condition, then the alternator may be the problem.

Have it tested to see if it’s working properly, or replaced it if necessary. A good alternator will read anywhere between 13.5 to 14.5 volts when you are idling.

Please Note: Other things like a Blown battery sensor fuse or bad ground wire can also trigger this alert, but from my experience, it always boils down to these three leading causes.

Additional Sources

https://www.lhmdodgeboise.com/dodge-battery.htm

https://www.autozone.com/lp/battery-services

https://www.dodgejourneyforum.com/topic/11913-intermittent-battery-drain/

Leave a Comment Cancel Reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Where Is the Battery on a 2014 Dodge Journey?

Author Alan Bianco

Posted Sep 1, 2022

The battery on a 2014 Dodge Journey is located in the engine compartment. It is located on the driver side of the vehicle near the front of the engine.

Where is the battery located on a 2014 dodge journey?

How do you access the battery on a 2014 dodge journey, what type of battery does a 2014 dodge journey use.

The battery on a 2014 Dodge Journey is located in the engine compartment. It is usually located near the front of the engine, on the passenger side.

To access the battery on a 2014 dodge journey, first open the hood and locate the battery. The battery is located in the engine compartment, on the right side of the vehicle. Once you have located the battery, unscrew the negative terminal cover and remove the cover. Then, unscrew the positive terminal cover and remove the cover. Finally, use a wrench to loosen the bolt that secures the battery in place.

A 2014 Dodge Journey uses a battery with a voltage of 12 volts and a capacity of 65 Ah. The battery is a lead-acid type and is located in the engine compartment.

How do you replace the battery on a 2014 dodge journey?

Assuming you would like a step-by-step guide on how to replace the battery on a 2014 Dodge Journey:

1. Open the hood of your Dodge Journey and prop it up. 2. Locate the battery on the left side of the engine compartment . It is held in place by a bracket and secured with a black plastic cover. 3. Use a Phillip’s head screwdriver to remove the cover. 4. Loosen the negative terminal first by loosening the retaining bolt with a wrench and then removing the connector. 5. Do the same for the positive terminal. 6. Remove the old battery from the bracket and carefully slide the new one in. 7. Reattach the terminals in the reverse order of which you detached them. 8. Replace the battery cover and close the hood.

How often should the battery on a 2014 dodge journey be replaced?

Assuming you are referring to the battery in the engine:

The battery in a 2014 Dodge Journey should be replaced every 3-5 years, depending on how often it is used. If the battery is frequently used, it may need to be replaced more often.

What are the symptoms of a dying battery on a 2014 dodge journey?

A dying battery on a 2014 dodge journey may exhibit a few different symptoms. One symptom may be that the journey won't start as easily as it used to, or may not start at all. Another symptom may be that the lights on the dash board or on the instrument cluster may start to dim and flicker. The radio may also start to cut in and out. If any of these symptoms are noticed, it's important to have the battery checked as soon as possible to see if it needs to be replaced.

How do you jump start a 2014 dodge journey with a dead battery?

If you have a dead battery in your 2014 Dodge Journey, there are a few ways you can jump start it. The first way is to use jumper cables. You'll need to connect the positive cable to the positive terminal on the dead battery, and the negative cable to the negative terminal . Once the cables are connected, you can start the Journey and let it run for a few minutes to charge the battery.

If you don't have jumper cables, you can try using a battery charger. You'll need to connect the positive lead from the charger to the positive terminal on the dead battery , and the negative lead from the charger to the negative terminal. Once the charger is connected, you can turn it on and let it charge the battery for a few hours.

If neither of these methods work, you may need to replace the battery.

What are the consequences of driving with a dead battery?

If your car battery dies, you may be stranded on the side of the road. This can be especially inconvenient if it happens while you're driving. If you have a dead battery, you won't be able to start your car. This can leave you stranded and without a way to get home or to your destination.

There are a few things you can do if your car battery dies. You can call a tow truck to take your car to a nearby service station. You can also call a friend or family member to come and give you a jump start. If you have a roadside assistance plan, you can call them for help.

If you're stranded on the side of the road, you may be at risk for crime. This is especially true if you're in a remote area or if it's late at night. If you have a dead battery, it's important to be aware of your surroundings and to take precautions to stay safe.

In addition to being an inconvenience, a dead battery can also be dangerous. If you're stranded in a dangerous area or in bad weather , you may be at risk for injury or even death. It's important to be prepared when driving, and to know what to do in the event that your car battery dies.

What are some tips for prolonging the life of your battery?

As we rely increasingly on devices that require batteries to function, it becomes ever more important to know how to prolong the life of your battery. Batteries are not immortal, and will eventually need to be replaced, but there are steps you can take to ensure that your battery lasts as long as possible.

Here are some tips for prolonging the life of your battery:

1. Avoid extreme temperatures

Batteries don't like extreme temperatures, either too hot or too cold. If you can, avoid exposing your battery to extreme temperatures, as this can shorten its lifespan. In particular, avoid leaving your device in a hot car, as the interior of a car can get incredibly hot, even in moderate weather.

2. Use your device regularly

Batteries are designed to be used, and so keeping your device regularly charged and in use will actually help to prolong its battery life. This is because batteries self-discharge when left unused for long periods of time, and this can lead to increased corrosion and decreases in capacity.

3. Avoid letting your battery drains completely

Once your battery gets below a certain threshold, it becomes increasingly difficult to charge it back up again. So, it's b est to avoid letting your battery drains com pletely before recharging it.

4. Don't overcharge your battery

Leaving your device plugged in long after it's reached 100% can actually be harmful to the battery. So, it's best to unplug your device once it's reached a full charge.

5. calibrate your battery

Periodically calibrating your battery can help to prolong its life. This is because it can help to keep the battery level accurate, which in turn can help to prevent it from overcharging or becoming damaged.

6. Store your device properly

When you're not using your device, be sure to store it in a cool, dry place. And, if you're going to be storing it for an extended period of time, it's best to store it with a partial charge, as this can help to keep the battery healthy.

By following these tips, you can help to prolong the life of your battery and keep your device running smoothly.

Frequently Asked Questions

Where is the battery located on a dodge journey.

The battery is located behind the front bumper on the driver's side.

Why is my battery light on in my Dodge Journey?

The most common reason for the red battery light coming on in a Dodge Journey is when there is a malfunction with the charging system. This can be caused by a number of issues, but the most common are faulty alternators.

How to reset the battery light on a journey?

Step 1. Plug in the vehicle to a working power outlet and wait 10 seconds. Step 2. Use a OBDII scanner to clear all error codes. Test the engine functionality after completing the scan. Journey - How to reset the battery warning light?

How do you change the battery in a Dodge Journey?

Disconnect the negative battery cable. Remove the six screws that hold the battery cover in place. Carefully remove the cover. Locate and disconnect the positive battery cable. Lift out the old battery. Install the new battery in reverse order. Replace the cover and screws. reconnect the negative battery cable, and re-secure the jack stands.

What happens to the transmission when you change the battery?

In many Dodges, the transmission "learns" how you drive over time and makes adjustments, so you may experience altered driving dynamics as your car re-learns your driving style after changing the battery.

Featured Images: pexels.com

Alan Bianco

Writer at CGAA

Alan Bianco is an accomplished article author and content creator with over 10 years of experience in the field. He has written extensively on a range of topics, from finance and business to technology and travel. After obtaining a degree in journalism, he pursued a career as a freelance writer, beginning his professional journey by contributing to various online magazines.

How to Start a Dodge Caravan without Keys?

Single Car Accident Insurance Claim: Your Action Plan

Unlocking Profit Potential: What Is Contribution Margin?

• Bahasa Indonesia
• Eastern Europe
• Moscow Oblast

Elektrostal

Elektrostal Localisation : Country Russia , Oblast Moscow Oblast . Available Information : Geographical coordinates , Population, Area, Altitude, Weather and Hotel . Nearby cities and villages : Noginsk , Pavlovsky Posad and Staraya Kupavna .

Information

Find all the information of Elektrostal or click on the section of your choice in the left menu.

• Update data

Elektrostal Demography

Information on the people and the population of Elektrostal.

Elektrostal Geography

Geographic Information regarding City of Elektrostal .

Elektrostal Distance

Distance (in kilometers) between Elektrostal and the biggest cities of Russia.

Elektrostal Map

Locate simply the city of Elektrostal through the card, map and satellite image of the city.

Elektrostal Nearby cities and villages

Elektrostal weather.

Weather forecast for the next coming days and current time of Elektrostal.

Elektrostal Sunrise and sunset

Find below the times of sunrise and sunset calculated 7 days to Elektrostal.

Elektrostal Hotel

Our team has selected for you a list of hotel in Elektrostal classified by value for money. Book your hotel room at the best price.

Elektrostal Nearby

Below is a list of activities and point of interest in Elektrostal and its surroundings.

Elektrostal Page

• Information /Russian-Federation--Moscow-Oblast--Elektrostal#info
• Demography /Russian-Federation--Moscow-Oblast--Elektrostal#demo
• Geography /Russian-Federation--Moscow-Oblast--Elektrostal#geo
• Distance /Russian-Federation--Moscow-Oblast--Elektrostal#dist1
• Map /Russian-Federation--Moscow-Oblast--Elektrostal#map
• Nearby cities and villages /Russian-Federation--Moscow-Oblast--Elektrostal#dist2
• Weather /Russian-Federation--Moscow-Oblast--Elektrostal#weather
• Sunrise and sunset /Russian-Federation--Moscow-Oblast--Elektrostal#sun
• Hotel /Russian-Federation--Moscow-Oblast--Elektrostal#hotel
• Nearby /Russian-Federation--Moscow-Oblast--Elektrostal#around
• Page /Russian-Federation--Moscow-Oblast--Elektrostal#page
• Terms of Use
• Copyright © 2024 DB-City - All rights reserved
• Change Ad Consent Do not sell my data

Expedia Rewards is now One Key™

Elektrostal, visit elektrostal, check elektrostal hotel availability, popular places to visit.

• Electrostal History and Art Museum

You can spend time exploring the galleries in Electrostal History and Art Museum in Elektrostal. Take in the museums while you're in the area.

• Cities near Elektrostal

• Places of interest
• Yuri Gagarin Cosmonaut Training Center
• Central Museum of the Air Forces at Monino
• Peter the Great Military Academy
• Ramenskii History and Art Museum
• Bykovo Manor
• Balashikha Arena
• Malenky Puppet Theater
• Balashikha Museum of History and Local Lore
• Pekhorka Park
• Saturn Stadium
• Orekhovo Zuevsky City Exhibition Hall
• Noginsk Museum and Exhibition Center