- Français - French
- 中文 - Chinese (Simplified)
- Español - Spanish (Castillian)
- Cybersecurity Safety Notice
- About the Book
- Pact Series Master Range
- ComPact NSX Range
- Operating the Circuit Breaker
- EcoStruxure Power Commission Software
- De-Energizing the Circuit Breaker
- Environmental Conditions
- Front Face Description
- Opening, Closing, and Resetting the Circuit Breaker
- Testing the Circuit Breaker
- Locking the Circuit Breaker
- Testing a Circuit Breaker With Direct Rotary Handle
- Locking a Circuit Breaker With Direct Rotary Handle
- Testing a Circuit Breaker With Extended Rotary Handle
- Locking a Circuit Breaker With Extended Rotary Handle
- Opening, Closing, and Resetting a Circuit Breaker With Motor Mechanism
- Opening, Closing, and Resetting Circuit Breakers With Communicating Motor Mechanism
- Plug-in Circuit Breaker
- Withdrawable Circuit Breaker
- Accessories
- Electrical Auxiliary Device Summary
- Indication Contacts
- Wireless Indication Auxiliary
- SDTAM Module ( MicroLogic 2 M and 6 E-M )
- 24 Vdc Power Supply Connector
- BSCM Breaker Status Control Module
- Insulated NSX Cord
- Control Auxiliaries
- PowerTag Energy M250/M630
- Applications
- Fault Currents in Electrical Distribution
- Protection Against Overcurrents in Electrical Distribution
- Protection Against Ground Faults
- Protection for Motor-Feeders
- Thermal-Magnetic Trip Unit Summary
- TM-D Thermal-Magnetic Trip Unit for 1P and 2P Circuit Breakers
- TM-D Thermal-Magnetic Trip Unit for 1P Circuit Breakers 250 A
- TM-D Thermal-Magnetic Trip Unit for 3P and 4P Circuit Breakers up to 63 A
TM-D Thermal-Magnetic Trip Unit for 3P and 4P Circuit Breakers from 80 A to 250 A
- TM-G Thermal-Magnetic Trip Unit
- MA Magnetic Trip Unit
- Earth-Leakage Protection by VigiPacT Add-on
- Characteristics of MicroLogic Electronic Trip Units
- MicroLogic 2 Electronic Trip Units
- MicroLogic 4 Electronic Trip Units
- MicroLogic 1.3 M Electronic Trip Unit
- MicroLogic 2 M Electronic Trip Unit
- MicroLogic 2 G Electronic Trip Unit
- MicroLogic 2 AB and 4 AB Electronic Trip Units
- MicroLogic Maintenance Interfaces
- Pocket Battery
- Service Interface Connected to a PC
- Stand-Alone USB Maintenance Interface
- USB Maintenance Interface Connected to a PC
- Commissioning
- Maintaining the Circuit Breaker During Operation
- Responding to a Trip
- Troubleshooting
- ComPact NSX 100-250 - Distribution Protection Tripping Curves
- ComPact NSX 100-250 - Motor-Feeder Protection Tripping Curves
- ComPact NSX 400-630 - Distribution Protection Tripping Curves
- ComPact NSX 400-630 - Motor-Feeder Protection Tripping Curves
- ComPact NSX 100-630 - Reflex Tripping
- ComPact NSX 100-630 - Limitation Curves
For the best experience of this site, please enable Javascript for the www.productinfo.schneider-electric.com domain.
Introduction
The TM-D thermal-magnetic trip unit is designed to protect conductors in commercial and industrial electrical distribution.
Description
The adjustment dials are on the front of the trip unit:
A Setting range for the TM-D thermal-magnetic trip unit
B Adjustment dial for the thermal protection pickup Ir
C Adjustment dial for the magnetic protection pickup Ii (for TM-D 200/250 only)
Setting the Thermal Protection
The thermal protection pickup Ir is set by a 4-setting dial.
Turning the thermal protection adjustment dial (A) modifies the trip curve as shown (B) .
The following table shows the values of the pickup Ir (in amperes) for thermal protection (values indicated on the dial) with respect to every trip unit rating, relative to the position of the dial Ir .
Setting the Magnetic Protection on Trip Units with In from 80 A to 160 A
For trip units rated below 200 A, the magnetic protection pickup cannot be adjusted and equals the value shown below:
Setting the Magnetic Protection on Trip Units with In from 200 A to 250 A
For trip units rated between 200 A and 250 A, the magnetic protection pickup Ii is set using a 6-setting dial.
Turning the magnetic protection adjustment dial (A) modifies the trip curve as shown (B) .
The following table shows the values of the pickup Ii (in amperes) for magnetic protection (values indicated on the dial), relative to the position of the Ii dial:
Example of Application
Power supplied by a 1,250 kVA transformer - 400 V, 4%
Protection of a distribution box located 15 m away, the loads on which are mainly for lighting (incandescent bulbs), heating, and small machines
The value of the calculated rated current (load consumption) is In = 175 A.
The following illustration shows the installation diagram:
Calculations performed on the installation in accordance with the regulations can be used to determine the characteristics of the appropriate ComPact NSX circuit breaker to install (calculations performed using the Ecostruxure Power Design – Ecodial software).
The following table presents the circuit breaker selection:
The following table shows the trip unit protection settings:
Show QR code for this page
Was this helpful?
Contact Information
Legal information.
The information provided in this document contains general descriptions, technical characteristics and/or recommendations related to products/solutions.
This document is not intended as a substitute for a detailed study or operational and site-specific development or schematic plan. It is not to be used for determining suitability or reliability of the products/solutions for specific user applications. It is the duty of any such user to perform or have any professional expert of its choice (integrator, specifier or the like) perform the appropriate and comprehensive risk analysis, evaluation and testing of the products/solutions with respect to the relevant specific application or use thereof.
The Schneider Electric brand and any trademarks of Schneider Electric SE and its subsidiaries referred to in this document are the property of Schneider Electric SE or its subsidiaries. All other brands may be trademarks of their respective owner.
This document and its content are protected under applicable copyright laws and provided for informative use only. No part of this document may be reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), for any purpose, without the prior written permission of Schneider Electric.
Schneider Electric does not grant any right or license for commercial use of the document or its content, except for a non-exclusive and personal license to consult it on an "as is" basis.
Schneider Electric reserves the right to make changes or updates with respect to or in the content of this document or the format thereof, at any time without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by Schneider Electric and its subsidiaries for any errors or omissions in the informational content of this document, as well as any non-intended use or misuse of the content thereof.
© 2022 Schneider Electric
TM-D Thermal-Magnetic Trip Unit for 3P and 4P Circuit Breakers up to 63 A
Introduction
The TM-D thermal-magnetic trip unit for 3P/4P circuit breakers up to 63 A are interchangeable trip units.
They are designed for AC and DC general-purpose applications.
The TM-D interchangeable 3P/4P trip units provide:
o adjustable thermal threshold
o fixed magnetic pickup
Description
The setting range and adjustment dials are on the front of the trip unit.
A Setting range for TM-D thermal-magnetic 3P/4P trip unit
B Adjustment dial for the thermal protection pickup Ir
Setting the Thermal Protection
The thermal protection pickup Ir is set by a 4-setting dial.
Turning the thermal protection adjustment dial ( A ) modifies the trip curve as shown ( B ).
The table below shows the values of the pickup Ir (in amperes) for thermal protection (values indicated on the dial) with respect to every trip unit rating, relative to the position of the dial Ir.
Setting the Magnetic Protection
The magnetic protection pickup cannot be adjusted and equals the value shown below:
DOCA0140EN-01
© 2020 Schneider Electric. All rights reserved.
- Drive technology
- Automation technology
- Residential Electric
- Low-Voltage controls and distribution
- Market-specific solutions
- Medium-Voltage Components
- ... and everything else you need
- NEMA & General Purpose Controls
- Definite Purpose Contactors
- Circuit Protection Devices
- Safety & Disconnect Switches
- Engineering
- Motor Control Centers
- Panelboards
- Switchboards
- Transformers
- Surge Protection Devices
- Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
- Industrial controls
- Low-voltage components
- Power Circuit Breakers
- Molded Case Circuit Breakers (MCCB)
- Miniature Circuit Breakers
- Miniature Circuit Breakers, IEC
- Supplement Protector
- Panelboard Mounting 480V Circuit Breakers
- General Purpose MCCBs
- Sentron Molded Case Circuit Breakers
- 3VA Molded Case Circuit Breakers
- VL Molded Case Circuit Breakers
- DG-frame up to 150A
- FG-frame up to 250A
- JG-frame up to 400A
- LG-frame up to 600A
- MG-frame up to 800A
- NG-frame up to 1200A
- PG-frame up to 1600A
- Molded Case Switches
- Motor Circuit Protectors
- 600 Volt DC Breakers
- Accessories
- 3VL IEC Rated Circuit Breakers
- 3-pole, ETU
- 3-pole, LCD ETU
- Internal Accessories
- N-Interrupting class up to 35 kA/480 V
- H-Interrupting class up to 65 kA/480 V
- L-Interrupting class up to 100 kA/480 V
- Trip unit only
- © Siemens 2022
- Corporate Information
- Terms of Use
- Data Privacy
- Cookie Policy
- Industry Mall T&C
- Get custom product tools and services
- Access training
- Manage support cases
- Create and manage your orders (authorised partners only)
Welcome to the Schneider Electric Website
trip unit TM200D for ComPacT NSX 250 circuit breakers. thermal magnetic. rating 200 A. 3 poles 3d
Poles description:
[In] rated current:
Trip unit name:
Sustainability
Well-being performance
Certifications & standards.
REACh Declaration
Compliant with Exemptions
China RoHS declaration
Product out of China RoHS scope. Substance declaration for your information
Product Environmental Profile
End of Life Information
IMAGES
VIDEO
COMMENTS
A Setting range for the TM-D thermal-magnetic trip unit. B Adjustment dial for the thermal protection pickup Ir. C Adjustment dial for the magnetic protection pickup Im (for TM-D 200/250 only). Setting the Thermal Protection. The thermal protection pickup Ir is set by a 4-setting dial. Turning the thermal protection adjustment dial (A) modifies the trip curve as shown (B).
Figure 2 - TM thermal-magnetic and MA magnetic tripping units. Go back to CB tripping units ↑. Electronic tripping units // The electronic trip units instead use a microprocessor to process the current signal and operate the circuit breaker opening in case of fault.In addition to this, electronic tripping units offer more tripping criteria which are not feasible with electromechanical ...
Trip unit name TM-D Trip unit technology Thermal-magnetic Trip unit rating 250 A at 50 °C Protection type Short-circuit protection Overload protection Pollution degree 3 conforming to IEC 60947. 2 Complementary Control type Toggle Mounting mode Fixed Mounting support Backplate
Trip unit name: EAN Code: 3606481999566 ... Green Premium TM label is Schneider Electric's commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO 2 products.
The TM-D thermal-magnetic trip unit is designed to protect conductors in commercial and industrial electrical distribution. The trip unit exists in two configurations: 3P, 3D. 4P, 3D. Description. The adjustment dials are on the front of the trip unit: A Setting range for the TM-D thermal ...
What is the difference between the TM-D and TM-G and MA tripping units for compact NSX MCCB Circuit Breakers. ... Ir that can be adjusted in amps from 0.7 to 1 times the rating of the trip unit (16 A to 250 A), corresponding to settings from 11 to 250 A for the range of trip units .
The TM-D thermal-magnetic trip unit for 3P/4P circuit breakers up to 63 A are interchangeable trip units. They are designed for AC and DC general-purpose applications. The TM-D interchangeable 3P/4P trip units provide: o adjustable thermal threshold. o fixed magnetic pickup.
Two types of Thermo-Magnetic trip units: TMF: Thermo-Mag Fixed. TMA: Thermo-Mag Adjustable See details in the next page. Standard Protection. Standard Protection. Standard Protection. Advanced Protection. Advanced Protection. Connectivity & Communication.
Trip unit name: EAN Code: 3606481999610 ... Green Premium TM label is Schneider Electric's commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO 2 products.
Trip unit TM125D, ComPacT NSX160/250, 4 poles 3D (neutral not protected), thermal magnetic protections, 125A rating. C166TM125. ... Green Premium TM label is Schneider Electric's commitment to delivering products with best-in-class environmental performance.
Siemens Industry Catalog - Low-Voltage controls and distribution - Circuit Protection Devices - Molded Case Circuit Breakers (MCCB) - VL Molded Case Circuit Breakers - LG-frame up to 600A - 3-pole, TM - Trip unit only
TMG: it is a thermal magnetic trip unit used for Generation plants (it has extra different protection functions for generation phase that are not found in TMD) Released for: Schneider Electric Egypt and North East Africa. Published on: 3/2/2014 Last Modified on: 7/24/2022. Explore more. Range:
trip unit TM200D for ComPacT NSX 250 circuit breakers. thermal magnetic. rating 200 A. 3 poles 3d. ... Sustainability. Green Premium TM label is Schneider Electric's commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental ...